Table Of Contents; Lets Get Started - La Crosse Technology BBB86088v2 Instruction Manual

Welcome to the La Crosse Technology® family!
We hope you enjoy your new Atomic Clock.

Table of Contents

2 Let's Get Started
3 Basic Settings
4 Fahrenheit | Celsius
5 LCD Features
5 Daylight Saving Time Indicator
6 Atomic Time - WWVB Signal
6 Time Alarm
7 Activate | Deactivate Alarm
7 Snooze
7 Sensor Reception and Search
8 Temperature Trend Arrows
8 Position TX141-Bv2 Sensor
8 Low Battery
9 Let's Get Social
9 Care and Maintenance
9 Warranty and Support
10 Specifications
11 FCC Statement
Page | 1 www.lacrossetechnology.com/support
1. Insert 2 AA batteries into
your sensor.
∙The red LED light will flash
when your sensor transmits.
∙The TX button lets you
manually transmit a signal.
2. Insert 2 AA batteries into
your clock.
3. Configure basic settings.
4. After 5 minutes, place
your sensor outside in a
shaded location.
∙ Mount your clock on the wall with the 3 holes on the back, or
use the pullout stand to place your clock on a desk or
counter.
BBB86088v2 BBB86088v2

Lets Get Started

Pullout Stand
www.lacrossetechnology.com/support
LED
TX Button
Wall Hang
AA
AA
Page | 2