A&D EK-i Series Quick Start Manual page 8

EN る
5. At step 3, pressing the
value. Do not touch the pan during weighing.
When the zero calibration is completed, the display shows
the calibration weight value.
□ To perform the zero calibration only and finish the
procedure, press the
6. Place the calibration weight with the same value as
displayed on the pan. Press the
Do not touch the pan during weighing.
7. appears.
Remove the weight from the pan, and press the CAL switch
or key to return to the weighing mode.
key weighs the zero-point
key.
key to weigh it.
8
Weighing pan
With nothing
on the pan
To store
Calibration
weight
To store