Important Safety Instructions - LG VH9010DN Owner's Manual

Table of Contents

Advertisement

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE
Read and follow all instructions before using your vacuum cleaner to prevent the risk of fire, electrical shock, personal injury, or
damage when using the vacuum cleaner. This guide do not cover all possible conditions that may occur. Always contact your
service agent or manufacturer about problems that you do not understand. This appliance complies with the following EC
Directives :-2006/95/EC Low Voltage Directive -2004/108/EC EMC Directive.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "WARNING" or "CAUTION."
These words mean:
WARNING
CAUTION
WARNING
• Do not leave appliance when plugged in. Unplug
from outlet when not in use and before servicing.
• Do not use outdoors or on wet surfaces
• Do not allow to be used as a toy. Close attention is
necessary when used by or near children.
• Use only as described in this manual. Use only
manufacturer's recommended attachments.
• Do not use with damaged cord or plug. If appliance
is not working as it should, has been dropped,
damaged, left outdoors, or dropped into water,
return it to a service center.
• Do not pull or carry by cord, use cord as a handle,
close a door on cord, or pull cord around sharp
edges or corners. Do not run appliance over cord.
Keep cord away from heated surfaces.
• Do not unplug by pulling on cord. To unplug, grasp
the plug, not the cord.
• Do not handle plug or appliance with wet hands.
• Do not put any object into openings. Do not use
with any opening blocked; keep free of dust, lint,
hair, and anything that may reduce air flow.
• Keep hair, loose clothing, fingers, and all parts of
body away from openings and moving parts.
• Turn off all controls before unplugging.
• Do not use the bedding cleaner on stairs.
• Do not use to pick up flammable or combustible
liquids, such as gasoline, or use in areas where
they may be present.
• No one other than repair technician shall
disassemble or modify the product.
It causes fire or electrical shock.
• Do not spray combustible materials such as gasoline
or thinner, or surfactants such as detergents or
bathing goods, or drinks near cleaner and station.
It causes explosion or fire.
4
IMPORTANT SAFETY INSTRUCTIONS
This symbol will alert you to hazards or unsafe practices which could cause serious
bodily harm or death.
This symbol will alert you to hazards or unsafe practices which could
cause bodily injury or property damage.
SAVE THESE INSTRUCTIONS
• Do not let power cord be pressed by heavy things
or touch sharp parts.
Using damaged cord or plug causes fire or electrical
shock.
When the power cord is damaged, it is dangerous, so
please replace the power cord from our service center.
• Do not let liquid such as water enter the product,
and do not inhale liquid, blazer, tack, or ember
during the cleaning.
It causes fire or electrical shock.
If water entered inside the equipment, first, turn off the
power switch of the main body, pull out the power plug,
and contact LG Electronics Service Agent to avoid
hazard.
• When the power is turned on, or during the user of
the cleaner, if ELCB is operated, immediately stop
the use, and contact LG Electronics Service Agent.
An electrical shock accident may occur.
• Do not insert pins around the cleaner and station.
There is a risk of electrical shock.
• When there is a leakage of gases such as the
city gas, do not touch the power plug socket, but
ventilate by opening the window.
There is a risk of fire or explosion.
• When you insert of pull out the power plug to or
from the socket, first turn off the power switch.
It causes fire or electrical shock.
• Make sure to use a socket of at least 5A exclusively.
If several devices are used at one socket at the same
time, it causes fire by the heating of the socket.
• If power cord or plug is damaged, manipulated
or bent by force, or pulled by force, or if the part
inserting to the socket is lose, do not use the
power plug or cord.
It causes fire or electrical shock.

Advertisement

Table of Contents
loading

Table of Contents