Battery Charging - Tait T809-10 Service Manual

32 Installation Guidelines
To achieve this:
• Keep the ambient temperature low in the area immediately around the
power supply.
• Ensure airflow is not restricted.
3.10

Battery Charging

The T809-10 is not designed for battery charging. In order to use the T809-10 as a battery
charger, a battery management module will be required.
Any current T808/T807 installations being replaced with the T809-10 and set up for bat-
tery charging, must be fitted with a battery management module if not already fitted.
November 2004
MBZ-00001-01
Copyright © 2004 Tait Electronics Ltd