Installation Guidelines; Rack Mounting; T809-10-0000) Configuration; T809-10-00C1 And -00C2 Configuration - Tait T809-10 Service Manual

MBZ-00001-01
3

Installation Guidelines

This section gives a brief description of the basic rack mounting and wiring procedures.
3.1

Rack Mounting

The T809-10 is available in two configurations. The T809-10-0000 and the T809-10-00C1
(or -00C2).
3.1.1

T809-10-0000) Configuration

The T809-10-0000 is designed for use in a standard 483mm (19inch) T800 subrack fitted
with the same supporting guide rails as those used for the T808/T807.
To mount the T809-10-0000 into a subrack, use the two front-panel mounting screws.
3.1.2

T809-10-00C1 and -00C2 Configuration

The T809-10-00C1 and the T809-10-00C2 are both 2U subracks designed to fit into a
standard 483mm rack or cabinet. The T809-10-00C1 has a single power supply unit fit-
ted horizontally on a 2U front panel. The T809-00C2 has two power supply units fitted.
To mount the 2U subracks, secure the power supply into the rack using four front-panel
mounting screws.
Copyright © 2004 Tait Electronics Ltd
Installation Guidelines
November 2004
19