Safety Approvals - Tait T809-10 Service Manual

MBZ-00001-01
OFF and ON) the user is encouraged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Modifications not expressly approved by the manufacturer could void the
user's authority to operate the equipment.
Canadian ICES-003: 2004
tromagnetic susceptibility specifications.
AS/NZS CISPR22: 2004
magnetic susceptibility specifications.
1.3.2

Safety Approvals

This equipment complies with:
IEC 60950-1: 2001 (edition 1).
Tested according to national requirements for the following countries:
• All CB members as listed in CB Bulletin 107A, May 2004, including Aus-
tralia, New Zealand, Israel and the Republic of Korea.
• All CENELEC members as listed in EN 60950-1: 2001.
For the European Declaration of Conformity, refer to eudocs.taitworld.com
CAN/CSA-C22.2 No 60950-1.
ANSI/UL Std No 60950-1.
Safety approval will be void if T809-10 components are replaced with non-
Warning:
equivalent rated or non-certified/non-approved components. Contact Tait
Electronics Technical Support before replacing T809-10 components. For
important servicing information, refer to Section 6.
Copyright © 2004 Tait Electronics Ltd
(for Class B). Radiated and conducted emissions, and elec-
(for Class B). Radiated and conducted emissions, and electro-
Safety of information technology equipment.
Safety of information technology equipment.
Safety of information technology equipment.
General Information
November 2004
11