Fuel System Maintenance; Replacing The In-Line Fuel Filter - Toro TimeCutter SS 4225 Operator's Manual

Fuel System
Maintenance
DANGER
In certain conditions, fuel is extremely
flammable and highly explosive. A fire or
explosion from fuel can burn you and others
and can damage property.
Refer to Adding Fuel (page 16)
list of fuel related precautions.
Replacing the In-Line Fuel
Filter
Service Interval: Every 100 hours—Replace the
in-line fuel filter.
Never install a dirty filter after removing it from the
fuel line.
1. Park the machine on a level surface, disengage
the blade-control switch (PTO), and engage the
parking brake.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
for a complete
37
Figure 38
g027590
g033082