Available Accessories; Troubleshooting - Shark Navigator UV725 Series Owner's Manual

AVAILABLE ACCESSORIES

Pet Crevice Tool
A
This versatile, slender 8" tool removes
pet hair from hard-to-reach spaces like
corners, ceilings, and between couch
cushions.
Dusting Brush
B
This brush dusts and cleans delicate
surfaces. Great for use on fans, blinds,
lampshades, and keyboards.
Pet Hair Tool
C
The turbine brush loosens and removes
pet hair and debris from carpets, and
powerfully deep-cleans dander out of
upholstery and other surfaces.
Wide Upholstery Tool
D
The wide cleaning path helps remove
pet hair, dust, and large debris from
mattresses, couches, curtains, lampshades,
and other delicate upholstered surfaces.
Pet Multi-Tool
E
A single convertible tool for cleaning tough
pet messes two ways: use the stiff bristle
brush to clean stuck-on debris, or take off
the bristles to reveal an upholstery tool
perfect for removing stubborn pet hair and
large piles of debris.
Anti-Allergen Dust Brush
F
This brush features nylon fiber bristles
specifically designed for removing fine
dust and allergen particles from the most
delicate surfaces.
Under-Appliance Wand
G
Clean under and behind hard-to-move
appliances and furniture with this
adjustable 36" tool. Flip the extension
piece over to clean the underside of
appliances.
Large Accessory Bag
H
This convenient accessory storage bag
measures 32 cm x 70 cm and fits the
Under-Appliance Wand. Smaller size
available at sharkaccessories.com.
NOTE: Not all accessories come with all units. For a list of the accessories included with this model, refer to the
top inside flap of the box or the Quick Start Guide if your unit came with one. To order additional accessories,
please visit sharkaccessories.com.
s h a r kc l e a n . c o m
A B
C
D
E F
G H

TROUBLESHOOTING

Power cord caught in brushroll or floor nozzle.
• To minimize the risk of power cord damage, DO NOT run the vacuum over the power cord.
If this occurs, immediately shut off power to the vacuum and remove the cord from the
brushroll or nozzle.
• Inspect power cord and plug for any damage before use. DO NOT use vacuum cleaner with
a damaged cord or plug. Turn off all controls before plugging in or unplugging the vacuum
cleaner. Store your vacuum cleaner with the power cord secured around the two cord hooks.
Vacuum is not picking up debris. No suction or light suction.
• Check filters to see if they need cleaning. Follow instructions for rinsing and air-drying the
filters before reinstalling.
• Dust cup may be full; empty dust cup.
• Clear any blockages in the hose, hose connections, nozzle, wand, pod, or accessories. See
Checking for Blockages section for more information.
• If any hair is wrapped around the brushroll, continue vacuuming. This will allow the self-
cleaning brushroll to remove the hair wrap and send it to the dust cup. If some fibers remain
wrapped around the brushroll after continued use, open the brushroll cover to remove them.
Vacuum lifts area rugs.
• Make sure Power/Surface switch is set to Hard Floor (setting I).
• Suction is powerful. Take care when vacuuming area rugs or rugs with delicately sewn edges.
• To minimize suction, set the suction control slider to MIN. See the Suction Control section
for more information.
Brushroll does not spin.
• If the brushroll indicator light turns red, immediately turn off and unplug the vacuum.
Remove pod from floor nozzle and clear any blockages. Reconnect nozzle, plug in vacuum,
and turn on power.
• With the power on, recline the handle, which will automatically turn on the brushroll.
Vacuum turns off on its own or indicator light flashes red.
If your vacuum overheats, the thermostat will automatically turn off the motor. Follow these
steps to restart:
1. Turn vacuum off and unplug it.
2. Empty dust cup and clean filters (see Emptying the Dust Cup and Cleaning the Filters).
3. Check for blockages in hose, wand, nozzle, accessories, and inlet openings.
4. Allow unit to cool for a minimum of 60 minutes.
5. Plug in vacuum and turn it on.
For all other issues, please visit our website at sharkclean.com/support.
s h a r kc l e a n . c o m