Shark Navigator UV725 Series Owner's Manual page 3

1
(Click)
1. Place the Pod onto the Floor Nozzle Post.
2. Insert the Wand into the pod.
3. Attach the Lower Accessory Holder to the pod.
4. Insert the Handle into the top of the wand.
5. Attach the Hose Clip to the wand.
6. Connect the Hose to the back of the pod.
7. Store Accessories on the Tool Storage Posts.
For proper operation, ensure all parts are firmly clicked into place.
s h a r kc l e a n . c o m
ASSEMBLY
2
(Click)
(Click)
3
ASSEMBLY
4
(Click)
5
(Click)
6
(Click)
7
s h a r kc l e a n . c o m