Si04-857
8. Removal of Electrical Box
Procedure
Step
Remove thermistors, earth
wire and connectors (S1, S6)
1
Remove screw located
at right lower side of
electrical box.
(M4 × 16)
2
Disconnect swing motor
wire harness.
3
Lift up electrical box
slightly and disengage
hook located at bottom
side.
4
Disengage hook
located at top side.
Removal Procedure
Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Procedure
(R2328)
Removal of Electrical Box
Points
(R2329)
(R2330)
(R2331)
13