Table of Contents
Advertisement
8. Refer to the appropriate testing specification to determine the procedure for accumulating test
data and averaging test results.
C.5 Transporting Guide Tube and "A" Missile
To make transporting the system between test sites the "A" missile can be restrained in the guide
tube using the supplied locking pin. To use the locking pin place the "A" missile at the bottom of
the guide tube. Rotate the "A" missile until its cross drilled hole is aligned with the cross drilled
hole at the bottom of the guide tube. Press the button on the end of the lock pin and insert the lock
pin through the tube and missile until it protrudes from the opposite side of the guide tube.
Photo C.5 – Lock pin inserted
41
Advertisement
Table of Contents
