Appendix B Memory Card - Triax ASTM F1292 User Manual

APPENDIX B MEMORY CARD

The Triax Touch stores drop test results on standard Memory Cards, one of which is included with
each new Triax Touch hand held controller. Several manufacturers offer Memory Cards of varying
sizes and the Triax Touch can be used with any card up to and including 32 gigabytes. Memory
cards 64GB and above will not work in the Triax Touch due to the EXFAT file systems used on
these cards.
The Triax Touch operation of the Memory Card is identical to the operation of the PC file system.
Files and folders can be copied, deleted and created using standard PC applications such as
Windows Explorer.
The Triax Touch allows the user to store drop results in one of ten folders on memory card. When
a new memory card without any folders is installed in the Triax Touch drop test results will be
stored in the ROOT folder (the folder is not actually called ROOT. If the memory card were
installed in a PC and was called drive E: the ROOT folder would be "E:\")
B.1 Creating Folders on the Memory Card
Using Windows Explorer the user can create up to nine more folders on the memory card for
storing drop test results. Folder names must be from 1 to 8 characters long and contain only upper
case alpha (A – Z) and numeric (0 – 9) characters and should not have spaces (i.e. FOLDER1).
Sub folders are not supported by the Triax Touch file system.
B.2 Selecting Memory Card Folder
To select a folder into which to store drop test results, turn on the Triax Touch and press the
MENU key
33