Working With Surround Sound - Focusrite Clarett+ 8Pre User Manual

Working with surround sound

Because the Clarett+ 8Pre is equipped with ten line outputs, it is suitable for working in multichannel
sound formats – LCRS, 5.1 surround or 7.1 surround, for example.
To route each channel to the correct output you will need to route the DAW outputs to the Line
Outputs in Focusrite Control (e.g. DAW Output 1 > Line Output 1, DAW Output 2 > Line Output 2,
etc.).
Windows users:
In Windows, surround sound can only be used in software supporting multichannel ASIO. In most
cases this will be your DAW, and in general, DAWs capable of mixing in surround allow you to set the
Audio Output Preferences I/O Settings
speaker mapping up in the DAW's or page.
Please see the User Manual (or Help files) for your DAW for guidance on setting up the outputs for
surround mixing with the speaker configuration you wish to use.
Mac users:
On Macs, surround sound configuration can be done from all applications that support multichannel
Applications > Utilities >
audio (DAWs & regular macOS Applications). To do this, go to:
Audio MIDI Setup > Clarett+ 8Pre > Configure Speakers > Configuration > Select the
desired configuration
.
14