I Electricity Supply Connecti Ons - Polaris W Series Installation And User Manual

2.2 I Electricity supply connecti ons

In order to avoid any risk of electrocuti on, fi re or serious injury, please follow the instructi ons
below:
• Use of an electrical extension is prohibited when connecti ng the control box.
• Make sure that the socket can be easily accessed at all ti mes and is protected from rain or
splashes.
• The control box is splash-proof, but must not be immersed in the water or any other liquid.
It must not be installed in a fl oodable area; keep it at least 3.5 metres away from the edge of
the pool and avoid exposing it to direct sunlight.
• Place the control box near the socket.
• Unscrew the protecti ve cap (see fi gure
• Connect the fl oati ng cable to the control box and lock it in place by turning the ring only in the clockwise directi on (to
prevent damage to the fl oati ng cable) (seefi gure
• Make sure that the connector is fully pushed in so that no water can get in (see fi gure
• Connect the power cord (see fi gure
maximum residual current device (if in doubt contact a qualifi ed technician).
9
).
).
). Only connect the control box to a power outlet protected by a 30 mA
).