Advertisement
Quick Links
IMPORTANT INFORMATION
•
Always disconnect the Polaris from the pool wall when cleaning or backwashing the pool
filter.
•
After cleaning or backwashing, let the filtration system run for at least five minutes before
re-connecting the Polaris.
•
New plumbing lines should be flushed out before installing the Polaris.
•
The Polaris should not be used to remove plaster dust in new pools.
•
Always remove the Polaris
•
Except when checking the wheel RPM, do not handle the Polaris while it is operating.
•
Always remove the Polaris from the pool before chemical shock treatments.
This one year limited warranty is extended to the original consumer purchaser of this Polaris
Vac-Sweep 360 Automatic Pool Cleaner manufactured by Polaris Pool Systems, Inc., from date
of manufacture of the unit as established by the serial number, or one year from date of purchase
with proof of purchase, whichever is later. Polaris warrants this product, including all parts and
components thereof, to be free of defects in material and workmanship. Normal replacement items
such as bags, tires, sweep hoses or sweep hose scrubbers which have been worn out by use or
improper installation are not covered by this warranty. The Polaris 360 frame is warranted for a
period of ten years.
This limited warranty does not apply if the failure is caused or contributed to by any of
the following: improper handling, improper usage, improper storage, winter freezing, abuse,
improper installation, removal of the UWF filter screen, unsuitable application of the unit, improper
maintenance, lack of reasonable and necessary maintenance, damage in transit or during
installation, or damage from repairs/alterations made or attempted by anyone other than Polaris or
one of its Authorized Service Centers.
Authorization to return a unit or part to the plant of manufacture must be obtained from the
Polaris Customer Service Department. Check with your dealer for the local procedure before
exercising this warranty. If further directions or instructions should be required, contact the
Customer Service Department at 1-800-VAC-SWEEP (USA and Canada only) or (760) 599-9600.
Be sure to insure the shipment against loss or damage in transit.
This limited warranty is valid only in the United States of America, Canada and Australia, and
it does not apply to Polaris Vac-Sweep 360 Automatic Swimming Pool Cleaners sold or installed in
any other country. Polaris Vac-Sweep 360 Automatic Pool Cleaners sold in the United Kingdom are
warranted for a period of two years from date of invoicing to the first user.
POLARIS 360
Code
W7520005
W7520005P
before swimmers enter the pool.
Polaris Vac-Sweep® 360 Limited Warranty
Description
Polaris Vac-Sweep® 360
Polaris Vac-Sweep® 360, Positrax®
1 Year Warranty
Advertisement
Related Manuals for Polaris Vac-Sweep 360 Positrax
Summary of Contents for Polaris Vac-Sweep 360 Positrax
- Page 1 Normal replacement items such as bags, tires, sweep hoses or sweep hose scrubbers which have been worn out by use or improper installation are not covered by this warranty. The Polaris 360 frame is warranted for a period of ten years.
- Page 2 Polaris is not responsible for, and the Limited Warranty does not cover, pattern removal, abrasion or markings on vinyl liners.
-
Page 3: Quick Installation Instructions
QUICK INSTALLATION INSTRUCTIONS Four quick steps to install and get maximum performance from the Polaris 360: • Install the Universal Wall Fitting (UWF) with Quick Disconnect and Eyeball Regulators • Test and adjust water pressure • Adjust feed hose to fit pool length •... - Page 4 Installing Other Pool Connections If the pool does not have a dedicated return line, the Polaris 360 connects to most common return lines using special adapter kits available for purchase at a participating Polaris dealer. For pools with plastic-pipe return lines (without pipe threads) that are cut off flush with the pool wall: If pipe is 1”...
- Page 5 2. Test and Adjust Water Pressure The Polaris is packaged with a pressure tester installed on the hose. Simply attach the hose to pool wall using the Quick Disconnect fitting. Turn pump on, cover large hole with thumb and confirm that water is released from the Pressure Relief Valve.
- Page 6 Place the Polaris into the pool. Turn on the pool filtration pump. 4. Check for Proper Wheel RPM Before operating the Polaris, check for proper wheel revolutions per minute (RPM). For maximum efficiency, the Polaris should operate between 28 and 32 RPM. Mark the single-wheel side tire.
-
Page 7: Routine Maintenance
The climbing ability of the Polaris depends on the pool’s shape and water pressure or flow. The Polaris climbs best in pools without sharp angles or curves in the transition from the pool floor to the pool wall. -
Page 8: Troubleshooting
Solution: 1. Adjust the thrust jet. 2. If the end of the hose that connects to the Polaris has a curve to it, align it with the curve of the feed pipe. 3. Make sure that the swivel on the feed pipe turns freely. - Page 9 Solution: 1. Check the hose length reaches within 6” of the farthest point of the pool. If not, order a new hose section from your Polaris dealer and add it to the first hose section. 2. Check thrust jet for 11 o’clock position that optimizes random turning.
- Page 10 Troubleshooting Worksheet If these solutions do not result in improved performance, contact the Polaris dealer who sold you the cleaner or call Customer Service. In order to provide faster and more convenient service, please have the following information available at the time of your call or when taking the Polaris in for service.