Uniden R7 User Manual page 8

KEY PRESS TO...
MUTE/
MUTE
DIM
MUTE on - Press MUTE/DIM to mute
an alarm. Returns to normal operation
10 seconds after the alert ends or if a
different band is detected during Mute
mode. Mute On displays for a few
seconds.
MUTE off - Press MUTE/DIM to restore
audible alarms before the 10 second
automatic mute time-out.
MUTE MEMORY
Save a Mute Location (Mute Memory) -
press MUTE/DIM again while Mute On
displays to save that GPS location and
frequency to memory. Mute Memory
displays on the screen.
R7 stores 2000 points divided between
Delete Mute Memory - Press MUTE/
DIM while Mute Memory displays; the R7
displays a delete confirmation message.
Press MUTE/DIM again to confirm.
MUTE RED LIGHT CAMERA VOICE ALERT
Mute the voice alert for a red light camera
alarm. Press MUTE/DIM while the voice
alarm for a red light camera sounds. The
voice alarm mutes.
MUTE ALERTS FOR POI OVERSPEED ALERT
AND USER LIMIT SPEED
When R7 alerts you to an overspeed or
speed limit situation (an alarm sounds and
the alert displays), you can press MUTE/
DIM to silence that alarm.
If Overspeed Alert and Radar Alert
time, R7 alternates between these
Mute Memory and User Mark
locations.
alarms are detected at the same
two alarms.
PRESS AND HOLD TO ...
DIM - Changes the display
brightness:
Auto (Default). Set
brightness levels for the
OLED display (see page
20).
Bright
Dim
Dimmer
Dark (Dark is off unless
there is alert.)
Off (Off regardless of
whether or not there is
an alert.)
DURING RED LIGHT
CAMERA ALERT
Press and hold MUTE/
DIM to delete the red light
camera point.
RED LIGHT CAMERA POINT
DELETE
When R7 alerts you to a
red light camera (the alert
displays), you can press
and hold MUTE/DIM to
delete that camera point.
After confirming this
deletion, R7 will not give
an alert for that camera.
- 8 -