Uniden R7 User Manual page 19

MENU ITEM
Left Display
(GPS on)
Alert Display
Speed Unit
(GPS on)
X Band Tone
K Band Tone
MRCD Tone
Ka Band Tone
Bogey Tone
Laser Tone
Auto Mute
Auto Mute
Volume
FUNCTION
Lets you select various attributes
to display on the left side of the
OLED.
Select one of two OLED display
formats (see page 27).
Select the speed measurement
type.
Set a tone to indicate X Band.
Set a tone to indicate K Band.
Set a tone to indicate MRCD.
Set a tone to indicate Ka Band.
Set a tone to indicate the
detector is responding to a
different Ka band signal.
Set a tone to indicate Laser.
Auto Mute reduces alarm level
to 1 after 3 seconds and returns
to normal operation (Auto Mute
= OFF) 10 seconds after the alert
ends. If the same alarm sounds
within the 10 second period,
Auto Mute remains at level
1. The unit returns to normal
operation (Auto Mute = OFF) if a
different band is detected during
Auto Mute = ON mode.
Sets a volume level for muted
alarms.
SETTINGS
Speed (Default)
Spd + Compass
Compass
Voltage
Altitude (m or ft)
Alert Display #1 (Default)
Alert Display #2
mph (Default)
km/h
1 ~ 12 tones (Default = 1)
1 ~ 12 tones (Default = 2)
1 ~ 12 tones (Default = 2)
1 ~ 12 tones (Default = 3)
1 ~ 5 tones (Default = 1)
1 ~ 12 tones (Default = 4)
On (Default)
Off
0 -
Off
- 19 -
Altitude display depends
on speed unit selection
(see page 28).
7
(Default = 2)