Uniden R7 User Manual page 10

ELEMENT WHAT IT DOES...
MUTE • Press the MUTE button to mute an alarm. Returns to normal
button
(Although
not labeled,
press
• Save a Mute location (Mute Memory) - press the MUTE button
and hold
MUTE to
access DIM
functions) R7 stores 2000 points divided between Mute Memory and User
• Delete Mute Memory - Press the MUTE button while Mute
• Red Light Camera Point Alert Mute/Delete - When R7 alerts you
• Mute Overspeed Alarms - When R7 alerts you to an overspeed or
• Press and hold the MUTE button to change the OLED display
DIM function. Press and hold for DIM options to display on the
OLED. Press the button again to scroll through and select one of the
following options:
• Auto (Default; see page 20 to set OLED brightness levels.)
• Bright
• Dim
• Dimmer
• Dark (Dark is off unless there is alert.)
• Off (Off regardless of whether or not there is an alert.)
LED (Red) • Off: Power is off.
• Steady on: Power is on.
• Flashing: Receiving an alert. The faster it flashes, the stronger the
USB Port Use this USB port to charge mobile devices.
operation 10 seconds after the alert ends or if a different band is
detected during Mute mode. Mute On displays on the R7 for a few
seconds.
again while Mute On displays on the R7 to save that GPS location
and frequency to memory. Mute Memory displays on the screen.
Memory displays on the R7; the R7 displays a delete confirmation
message. Press the MUTE button again to confirm.
to a red light camera (the alert displays), you can press MUTE
to mute or delete (press and hold) that camera point. After
confirming this deletion, R7 will not give an alert for that camera.
speed limit situation (an alarm sounds and the alert displays), you can
press MUTE to silence that alarm
brightness.
Dim level cannot be changed during a Red Light Camera alert.
signal.
Mark locations.
- 10 -