Reference measurement:
Reference length
4. Slow beeping:
The measurement is within ± 100 mm of the reference value.
Rapid beeping:
The measurement is within ± 1 mm of the reference value.
Important notices:
• T helaserpointstothelocationthatwillbemeasured.Noobjectsmay
get into the laser's line of measurement.
• T hedevicecompensatesthemeasurementfordifferentroom
temperatures. Therefore allow the device a brief adaptation period
when changing locations with large temperature differences.
• T hedeviceisonlyconditionallyuseableinoutdoorareasandcannotbe
used in strong sunlight.
• T hemeasurementresultsofoutdoormeasurementsmaybeinfluenced
or falsified by rain, fog and snow.
• I nunfavourableconditions,e.g.withpoorlyreflectingsurfaces,the
maximumdeviationmaybegreaterthan3 mm.
• C arpeting,upholsteryorcurtainswillnotreflectthelaseroptimally.
Measure to flat surfaces.
• M easurementsmadethroughglass(windowpanes)canfalsify
measurement results.
• A nenergy-savingfunctionswitchesthedeviceoffautomatically.
• C leanwithasoftcloth.Watermaynotbeallowedtopenetratethe
housing.
16
GB
1a. Number 1b. Number 2. Define reference
selection
reference
Set reference length
set-up
3. Now move the laser
90°
forward and back.
stop
1x
value
1x