Bison BA125 Instruction Manual

—— Instruction Manual ——
BA125/185
P A R T S L I S T
Item Qty Description
A 10 1/2" Cap Screws
B 10 Bolt Spacers
C 5 Horizontal Bars (Packaged Separately)
♦
Inspect all contents prior to installation. Report any missing parts to dealer immediately.
♦
Read all instructions before proceeding.
1. Orient the Frame Sides so that the big holes are on the outside of the unit. Place the Bolt Spacers (B)
on to the Cap Screws (A). Insert the Cap Screws (A) into the holes in the Frame Sides (F), making
sure that they go into the tube and so that the heads of the Cap Screws (A) are flush with the outside
wall. USE CAUTION TO KEEP THE SPACERS ON THE CAP SCREWS.
2. Line up the Horizontal Bars (C ) with the holes in the Frame Sides (F) (See Figure 1). Tighten the
3. Cap Screws (A) using the 3/8" Hex Bit (G).
3. Insert the Casters (E) into the bottom of Frame Sides (F).
Date: 08/23/05 Rev: 1
12 OR 18 BALL CADDY
C
B
A
B.A. N.J.C.
Item Qty Description
E 4 Casters
F 2 Frame Sides (Packaged Separately)
G 1 3/8" Hex Bit
F
Figure 1
File: \\bisonserver\publisher\BA125185.pub
1
Customer Service
(800) 247-7668
Ref#:950293