PERODUA Bezza Owner's Manual page 433

Table of Contents

Advertisement

Available languages

Available languages

Operation tips
• Make sure that the air inlet ducts in front of
the windshield are not blocked by leaves
or other obstructions.
• Do not move the temperature control
dial to the coldest position with the air
outlet control dial in Z or [ with the
air conditioner on in extremely humid
weather. The temperature difference
between outside air and the windshield
could cause mist on windshield, which
may block your vision.
• Do not move the air intake control dial to
\ with the air outlet control dial in Y,
Z, or [. The glass is prone to mist in
this setting.
• Do not use [ to cool in high humidity.
This could cause mist on windshield.
• If your vehicle has been parked for a
long time in intense sunlight and cabin
temperature is extremely high, turn on
the air conditioner with the windows fully
open.
After the vehicle interior becomes cool,
close the windows and set the temperature
to your desired level.
6–5
• The windows are prone to mist on a rainy
day, resulting in poor visibility.
If this happen, operate the air conditioner
in the cooling or demist mode.
w WARNING
When driving for long distances,
open the window or fresh air vent
every one hour to admit fresh air
into the car or change 'recirculation'
\ to 'fresh position' ].
Cooling
PASSENGER
0
Setting position of each control dial and
switch.
1 W
2 Low temperature side
3 ]
4 Desired position
If quick cooling is desired, set the dial 2 to
the right end, the dial 3 to \ position and
the dial 4 to the right end.
NOTE
Shift the dial to ] from time to time as
the glass may become fogged or the inside
the vehicle may become stuffy.
P

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Bezza and is the answer not in the manual?

Table of Contents

Save PDF