Table of Contents
Advertisement
SYMPTOM
Lamp does not light.
Lamp only lights for a short time.
Balloon does not inflate.
Only Fan is working.
Shuts down after 30 seconds.
PA GE 28 —GB4000 BALLOON LIGHT• OPERA TION AND PARTS MANUAL —REV . #1 (02/25/14)
Table 3. Troubleshooting
POSSIBLE PROBLEM
Is plug disconnected?
Is generator power switched off?
Is lamp loose?
Is power connector disconnected or
loose?
Is model of lamp incompatible?
Is ambient temperature too high -
more than 104° F (40° C)?
Is fan motor not working properly?
Is balloon cloth defective?
Is Lamp 1 on but fan is not working?
Is Lamp 1 not turning on?
Is Microswitch being pressed?
Figure 24. Location of Maintenance Parts
Plug in correctly.
T urn on switch.
Screwlamp securely into socket.
Connect disconnected connector.
Use genuine MQlamp.
Move lamp where there is proper
ventilation.
Check and repair fan motor.
Repair or replace balloon cloth.
Check and repair fan motor.
Check Lamps and cable wiring.
Check Microswitch or repair fan motor.
LAMP １
MICRO SWITCH
LAMP １
MAINTENANCE
SOLUTION
Advertisement
Table of Contents
