Table of Contents
Advertisement
NOTICE
Do not useexcessive forcewhen screwing the lampto
prevent lamp frombreaking.
6. Secure lamp holder on top of the lamp.
7. Reinstall lamp guard.
8. Pull down balloon and zip the bottom zipper to cover
lamp.
REPLACING BALLOON
1. Unzipthetopandbottomof theballoon.SeeFigure20.
BALLOON
Figure 20. Unzipping Balloon
2. Slide out the old or worn balloon over the top of the
lamp guard assembly. See Figure 21.
REMOVE OLD
BALLOON
Figure 21. Removing Old Balloon
GB4000 BALLOON LIGHT• OPERA TION AND PARTS MANUAL —REV . #1 (02/25/14) —PA GE
3. Slide in the new replacement balloon over the top of
the lamp guard assembly. See Figure 22.
4. Zip up the top and bottom of the new balloon. See
Figure 23.
UNZIP TOP AND
BOTTOM ZIPPERS
ZIP UP
NEW BALLOON
MAINTENANCE
INSTALL NEW
BALLOON
Figure 22. Replacing Balloon
Figure 23. Zipping Up New Balloon
Advertisement
Table of Contents
