Configuration With Ibalogic-V5; Configuring Signals - IBA ibaMS8xIEPE Manual

9.2

Configuration with ibaLogic-V5

Other documentation
Combined with ibaLogic-V5, an ibaPADU-S-IT-2x16 device can be used to realize indi-
vidual signal pre-processing or stand-alone applications. You find the basic way of pro-
ceeding description in the separate ibaPADU-S-IT-2x16 manual. This manual describes
only the signals belonging to this module.
9.2.1

Configuring signals

The signals can be configured in the I/O Configurator of ibaLogic-V5. Open the I/O Con-
figurator in the "Tools – I/O Configurator" menu. When you click on the <Update hard-
ware> button, then ibaLogic detects the module.
Figure 12:
The analog input channels and the status signals are displayed in the „Inputs" tab.
The inputs' operating mode can be selected from a dropdown-menu, see chapter 7.3:
 IEPE mode is the fixed setting for channels 0, 2, 4 and 6, but the filter can be selec-
ted:
26
Inputs ibaMS8xIEPE
Manual
Issue 1.3
ibaMS8xIEPE