Error And Status Signals - IBA ibaMS8xIEPE Manual

 Min/Max
When the modes 24V AC or 24V DC are selected, the columns „Min" and „Max" ap-
pear additionally. Here, you may define an upper and a lower limit of the measuring
range. The nominal voltage level of +/-24 V is assigned to a physical value.
 Unit
You can enter a unit, the default setting is „g".
 Sensitivity
Enter here the sensitivity according to the used IEPE sensor.
 Active
Enabling/disabling the signal.
 You can show or hide more columns via the context menu (click with the right
mouse button in the headline).
9.1.3

Error and status signals

Depending on the operating mode, error and status signals can be enabled for each
channel in the „Digital" tab, see also chapter 7.3.3.
24
Manual
Issue 1.3
ibaMS8xIEPE