Configure Inputs - IBA ibaMS8xIEPE Manual

ibaMS8xIEPE
9.1.2

Configure inputs

The following settings apply to the "Analog" tab:
Figure 10:
 Name
You can enter a name for the signal and two additional comments (click on the
icon in the Name field).
 Mode
The mode can be selected from a dropdown menu, see chapter 7.3.
IEPE mode is the fixed setting for channels 0, 2, 4 and 6, but the filter can be se-
lected:
Mode selection for the channels 1, 3, 5 and 7:
I/O Manager ibaMS8xIEPE – Analog tab
Manual
Issue 1.3
23