P P E E R R I I P P H H E E R R A A L L P P L L U U G G - - I I N N H H A A R R N N E E S S S; H1/3; H1/4 Black/White; H1/5 Green - Clarion SR5000 Installation Manual

H1/3 WHITE/BLUE (-) Activation Input
This input comes from the factory set to 2 activation pulses. This means that it is necessary to have
2 consecutive ground pulses on the white/blue wire for the remote start to activate or to deactivate.
The same holds true for the remote control activation when set to a two pulse setting it is necessary
to press the lock and unlock buttons simultaneously for the remote start to activate or deactivate.
H1/4 BLACK/WHITE (-) 200 mA Domelight Supervision Output
Connect this wire to the optional domelight supervision relay as shown in the following diagram:
IMPORTANT! This output is only intended to drive a relay. It cannot be connected
directly to the domelight circuit, as the output cannot support the current draw of one
or more bulbs.
H1/5 GREEN (-) door trigger input, zone 3
Most vehicles use negative door trigger circuits. Connect the GREEN wire to a wire showing
ground when any door is opened. When connecting to newer model vehicles there is generally a
need to use individual door triggers. This wire will report Zone 3.
NOTE: If using a door trigger wire that has a delay, Advanced Menu 2, feature 6, or the Pro Security
Programmer can be used to turn open zone notification off.
9