Honeywell HUSS-E4V User Manual page 71

Honeywell
Enable – Allow Alarm Input to be triggered.
Alarm Type – Select Normal Open or Normal Close from the drop-down list.
Alarm Output – Select the Output Port to do the Alarm output.
PTZ Activation – According to the camera; select the PTZ action from the drop-down list,
None, Preset or Pattern; enter the switch number for Preset or Pattern.HUSS-E4V will
interlock PTZ to action when Alarm Input is detected.
Click OK to apply the new settings; click Cancel to give up the changes and return to the
main window; click Default , the default setting is displayed on the screen; then click OK
or Apply to restore default settings.
Alarm Output
In the main screen (Figure 4-6), navigate to ConfigurationAlarm&Event
SettingAlarm Output and the following window is displayed:
67