Recording Setting - Honeywell HUSS-E4V User Manual

Honeywell
Date Format – Select from the drop-down list, YYYY-MM-DD, MM-DD-YYYY or DD-MM-
YYYY.
Time Format – Select from the drop-down list, 12HR or 24HR.
Date Time Position – Specify the position where the date and time is displayed. Select
from the drop-down list, Left-Bottom, Left-Middle, Left-Top, Middle-Bottom, Middle-Middle,
Middle-Top, Right-Bottom, Right-Middle or Right-Top.
Font Color – Click Set Color to set the OSD font color in the popped-out window. Click
Ok return to Video OSD screen.
Font BG Color – Click Set Color to set the background color of the OSD in the popped-
out window. Click Ok return to Video OSD screen.
Transparence – Enter the transparence number (0-99 from nontransparent to all
Transparent).
After selecting the channel, configure the following parameter:
Check "Enable main stream OSD", "Enable aux stream OSD" or both of them.
Enter the OSD you want to display on the screen location.
Click OK to apply the new settings; click Cancel to give up the changes and return to the
main window; click Default , the default setting is displayed on the screen; then click OK
or Apply to restore default settings.

Recording Setting

Recording Setting includes Main Stream Encoder and Aux Stream Encoder settings.
User can check the relevant information and modify relevant information here.
Main Stream Encoder
In the main screen (Figure 4-6), navigate to ConfigurationRecording SettingsMain
Stream Encoder and the following window is displayed:
55