Table of Contents
Advertisement
Honeywell
Figure 4-38 Multicast Settings
Select the target channel number from 1~4 or All Channels to apply the settings.
Configure the multicast settings of the channel as below:
Enable – Check it to enable multicast stream of the channel.
Main Stream Multicast IP Address – Enter a proper D class IP address
(224.0.1.0~239.255.255.255) as the destination address to which the main stream is sent.
The last digit of the address must be odd.
Aux Stream Multicast IP Address – When the main stream multicast IP address is
entered and it displays the correspondent aux stream multicast IP address automatically.
Multicast IP Port – Enter the destination port.
61
Advertisement
Table of Contents
