Table of Contents
Advertisement
HUSS-E4V Network Client
Figure 4-40 Motion Region
Specify the detection area(s) in which motion detection is enabled. Drag to select an area
with the mouse and the selected area is highlighted in green. Click Select All to select all
the area. Or click Clear All to clear all selected area. Click OK to save the setting and
return to the "Motion Detection" window
(Figure
4-39).
Alarm Out – Select the check box, video encoder will output alarm signal when motion is
detected.
PTZ Action – According to the camera; select the PTZ action from the drop-down list,
None, Preset or Pattern; enter the switch number for Preset or Pattern.HUSS-E4V will
interlock PTZ to action when motion is detected.
Click OK to apply the new settings; click Cancel to give up the changes and return to the
main window; click Default , the default setting is displayed on the screen; then click OK
or Apply to restore default settings.
64
Advertisement
Table of Contents
