Important Safety And Grounding Instructions; Safety And Compliance; Grounding Instructions - Delta EV Ultra Installation Manual

Important safety and grounding instructions

2
2.1

Safety and compliance

 Read the manual before installation or usage of device.
 Do not put tools, material or body parts into the electric vehicle connector.
 Do not use the EV Ultra fast charger if the chassis, power cord or charging cable are frayed, have
broken insulation, or any other signs of damaged.
 Do not install or use the Ultra fast charger if the enclosure is broken, cracked, open or has any other
indications of damage.
 The EV Ultra fast charger should be installed only by a qualified technician.
 To maintain environmental control of device, EV Ultra fast charger should be powered up
immediately after installation.
 Make sure that the materials used and the installation procedures follow local building codes and
safety standards.
 The information provided in this manual in no way exempts the user of responsibility to follow all
applicable codes or safety standards.
 The manufacturer is not responsible for physical injury, damage to property or equipment caused by
the installation of this device.
 This document provides instructions for the EV Ultra fast charger and should not be used for any
other product. Before installation or use of this product, you should review this manual carefully and
consult with a licensed contractor, licensed electrician, or trained installation expert to make sure of
compliance with local building codes and safety standards.
2.2

Grounding instructions

An equipment grounding conductor or a grounded, metal, and permanent wiring system is required for the
EV Ultra fast charger connection. This should be run with circuit conductors and connected to the equipment
grounding bar or lead on the EV Ultra fast charger.
EV Ultra Fast Charger Important safety and grounding instructions
3