Table of Contents
Advertisement
4 Before operation
a
User interface
b
Screws (field supply)
c
User interface holder
1 Choose a place where the signals reach the unit.
2 Attach the holder with screws to the wall or a similar location.
3 Hang the user interface on the user interface holder.
4.3
To set the clock
Note: If the time is NOT set,
1 Press
.
Result:
and
blink
2 Press
or
to set the current day of the week.
3 Press
.
Result:
blinks.
4 Press
or
to set the correct time.
Note: Holding down
or
setting rapidly.
5 Press
.
Result: Setting is complete. blinks.
4.4
To set the brightness of the indoor
unit display
1 Press
for at least 2 seconds.
Result: The menu appears on the display. is blinking.
2 Press
.
3 Press
or
to change the setting as follows:
...is blinking
4 To confirm the selected setting, press
Result: The brightness setting is changed.
Operation manual
6
,
, and
blink.
increases or decreases the time
Brightness is...
High
Low
Off
.
Note: The display automatically returns to the default screen after
60 seconds. To return to the default screen sooner, press
twice.
4.5
To turn on the power supply
1 Turn the circuit breaker on.
Result: The flap of the indoor unit will open and close to set the
reference position.
4.6
To change indoor unit position
setting
Set the indoor unit position to avoid direct airflow to walls.
1 Press
for at least 2 seconds.
Result: The menu appears on the display.
2 Press
or
to change the menu to .
Result: The menu
appears on the display.
3 Press
to select the menu.
Result: blinks.
4 Press
or
to change the setting as follows:
If the unit is...
Symbol
In the middle of the wall
(factory default setting)
≤500 mm from the wall
on right
≤500 mm from the wall
on left
Result: The airflow range will be adjusted to avoid direct contact
with the wall.
blinks.
Blinks
Result
FTXTA30B2V1B(W)(B)
Daikin room air conditioner
3P485919-13U – 2021.03
Advertisement
Table of Contents
