HBM TTS Mounting Instructions page 6

Safety instructions
Symbol
CAUTION
Notice
4
safety engineering considerations of torque
measurement technology in such a way as to minimize
remaining dangers. Prevailing regulations must be
complied with at all times. Reference must be made to
remaining dangers connected with torque measurement
technology.
In these mounting instructions, remaining dangers are
pointed out using the following symbols:
Significance
This marking warns of a potentially dangerous situa­
tion in which failure to comply with safety require­
ments can result in slight or moderate physical injury.
This marking draws your attention to a situation in
which failure to comply with safety requirements can
lead to damage to property.
CE mark
The CE mark enables the manufacturer to guarantee that
the product complies with the requirements of the rele­
vant EC directives (the declaration of conformity is avail­
able at http://www.hbm.com/HBMdoc).
Statutory marking requirements for waste disposal
National and local regulations regarding the protection of
the environment and recycling of raw materials require
old equipment to be separated from regular domestic
waste for disposal.
For more detailed information on disposal, please contact
the local authorities or the dealer from whom you pur­
chased the product.
A1571-3.0 HBM: public
TTS