Assembling The Torque Wrench; Fitting The Square Adapter On The Measuring Head - HBM TTS Mounting Instructions

Assembling the torque wrench

5 Assembling the torque wrench
10
The transfer torque wrench is taken apart and delivered
in a carrying case. The measuring head, the square
adapter, the knurled screw, the lever and the connecting
cable are all separate. Depending on the nominal (rated)
torque, there are one, two or three parts to the lever.
CAUTION
If you want to use a different square adapter from the
accessories program, instead of the one supplied, you
must keep to its maximum permissible torque (see Sec­
tion 9, Page 21).
5.1 Fitting the square adapter on the
measuring head
Notice
We recommend that the square adapter is always
installed in the same angular position. The later transfer
torque wrenches have arrows on the measuring head
and on the square adapter for ease of positioning (see
Fig. 5.1). The points of the arrows should point to one
another.
A1571-3.0 HBM: public
TTS