Sirius Satellite Radio Operations - Clarion DUZ385SAT Owner's Manual

SIRIUS Satellite Radio Operations

This function is available when Sirius Radio
Receiver is connected through the CeNET
cable.
This unit can control the following satellite radio
receivers:
• SIRIUS Satellite Radio Receiver: SIRCL3
• SIRIUS Satellite Translator Adapter:
CLA-SC1 (which needs Sirius universal Tuner
sold separately.)
Note:
• When the function is differ depending to the
connected receiver, they are distinguished by
the following notations:
"SIRIUS": for a SIRIUS Satellite Radio
Selecting a Satellite Radio mode
1. Press the [SRC] button.
The system changes to the specified
Satellite Radio mode.
Selecting a band
1. Press the [BND] button to select a band.
This changes the reception band as follows:
SR1 ➜ SR2 ➜ SR3 ➜ SR1 ...
● Information displayed during reception
The following information is displayed when the
satellite radio cannot be received normally.
• When the receiver is turned on the first time
or after a reset: "UPDATING"
• When a channel is being tuned in (no signal is
yet received):
SIRIUS: "ACQUIRING"
• A channel without a broadcast has been
selected:
SIRIUS: "INVALID CH"
• A channel not covered by your contract:
SIRIUS: "CALL 888" ↔ "539-SIRI"
(alternated)
Confirming your SIRIUS ID
1. Press and hold the [DISP] button for 1
second or longer to display the ADJUST
item.
2. Press the [x] or [v] button to select "SID
DISP".
3. Press the [ ] button, the display will display
the upper 6 digits.
4. Press the [w] or [z] button to switch
between the display for the upper 6 digits
and lower 6 digits.
5. To return to the previous mode, press the
[DISP] button.
Displaying channel labels
1. Press the [DISP] button to select the desired
channel label.
Channel ➜ Category ➜ Title (Artist) ➜ Radio
text ➜ Channel...
Channel selection
1. Channels are selected with the [x] or
[v] button.
∗ For details, see the following operation
descriptions.
Note:
• The audio output is muted and other button
operations are not accepted during channel
selection.
Tuning mode
There are two channel selection modes: quick
tuning mode and step tuning mode.
● Quick tuning
1. Press and hold the [x] or [v] button for 1
second or longer.
● Step tuning
1. Press the [x] or [v] button.
31
DUZ385SAT