Thank you for purchasing this Clarion product. ∗ Please read this owner’s manual in its entirety before operating this equipment. ∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). ∗ Check the contents of the enclosed warranty card and keep it carefully with this manual.
Operation status indication (Frequency, clock) Preset channel indication (1 to 6) Stereo indication Manual indication Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter. DB166 [ BND ] Z-Enhancer indication Random indication Repeat indication...
• Perform random play while in the CD mode. [SCN] button • Perform scan play for 10 seconds of each track while in the CD mode. DB166 [M-B] button • Press the button to switch the MAGNA BASS EXTEND on/off.
3. This unit uses a precision mechanism. Even in the event that trouble arises, never open the case, disassemble the unit, or lubricate the rotating parts. Bottom View of Source Unit DB166...
If you try to play such a compact disc, you may not be able to get it back out of the CD player or it may damage the CD player. LCD Screen In extreme cold, the screen movement may slow down and the screen may darken, but this is normal.
Be careful not to damage it by pressing on it with fingernails, pens, screwdrivers, etc. DCP Rear Panel Main Unit Front connector Main unit connector Note: • If the DCP is dirty, wipe off the dirt with a soft, dry cloth only. DB166...
Each time you press the [D] button, the display switches in the following order: Main display ➜ Clock display ➜ Main display... DB166 Note:Be sure to read this chapter referring to the front diagrams of chapter “2. CONTROLS” on page 3 (unfold).
1. Press the [BND] button and select the desired band. 2. Press the corresponding [DIRECT] button to recall the stored station. ∗ Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store that station into preset memory. DB166...
“ISR” appears in the display. Press the [ISR] button again to return to the previous mode. DB166 CD Operations Loading a CD Insert a CD into the center of the CD SLOT with the labeled side facing up.
Press and hold the [å] button for 1 second or longer. Top function The top function resets the CD player to the first track of the disc. Press the [BND] button to play the first track (track No. 1) on the disc.
If an error display other than the ones described above appears, press the reset button. If the problem persists, turn off the power and consult your store of purchase. DB166 Cause Replace with a fuse of the same amperage. If the fuse blows again, consult your store of purchase.