Esc J N - Citizen iDP-3221 Series User Manual

ESC J n
[Function] Printing and feeding paper in minimum pitch
[Code] <1B> H <4A> H <n>
[Range] 0 n 255
[Outline] Prints the data held in the print buffer and feeds paper by n/360 inches.
the line is taken as the start position for the next print.
[Caution] The line feed width can be set separately for the Standard and Page modes.
This command does not affect the line feed width defined by ESC 2 or ESC 3.
The basic calculation pitch is set by GS P.
Fractions resulting from calculation are corrected with the minimum pitch of the mechanism,
and the remainder is omitted.
In Standard mode, this command uses the vertical (paper feed direction) basic calculation
pitch (y).
In Page mode, this command acts differently depending on the start point:
(1) If the start point specified by ESC T is top left or bottom right, the command uses the
(2) If the start point specified by ESC T is top right or bottom left, the command uses the
[Default] Undefined
[Sample Program]
See Sample Program and Print Results for ESC 2 on page 57.
vertical (paper feed direction) basic calculation pitch (y).
horizontal (perpendicular to the paper feed direction) basic calculation pitch (x).
The maximum settable line feed width is 1016 mm (40 inches).
this maximum is trimmed to the maximum.
start position for the next print.
The beginning of the line is taken as the
[Print Results]
64
iDP3221 User's Manual
The beginning of
A setting greater than
CITIZEN