Citizen iDP-3221 Series User Manual page 120

• For JAN13, the bar code is printed when 13 bytes of bar code data has been entered, and the
subsequent data is handled as normal data.
• For JAN8, the bar code is printed when 8 bytes of bar code data has been entered, and the
subsequent data is handled as normal data.
• The data of ITF bar code must have an even number of columns.
odd number of columns, the last column is ignored.
For (2):
• Numeral "n" indicates the number of columns in the data, so that "n" bytes of the
subsequent data is handled as bar code data.
• If "n" is out of the range, the command handling is aborted, so that the subsequent data is
handled as normal data.
For Standard mode:
• If "d" is out of the range, only a paper feed is executed, and the subsequent data is handled
as normal data.
• If the bar code is wider than the print area for one line, the bar code is not printed, but only
a paper feed is executed.
• The amount of paper feed corresponds to the height of the bar code (including the HRI
characters if HRI character printing is specified), irrespective of the line feed width set by a
command such as ESC 2 or ESC 3.
• This command only works if no data exists in the print buffer.
print buffer, the data subsequent to "m" is handled as normal data.
• After the bar code is printed, the beginning of the line is taken as the start position for the
next print.
• This command is not affected by any print modes (highlighting, double printing, underline,
and character size), except for the 90 -right-turned character mode.
For Page mode:
• This command only maps the bar code, without performing a printout.
is mapped, the next dot to the last column of the bar code is taken as the start position for
the next data mapping.
• If "d" is out of the range, the command handling is aborted, so that the subsequent data is
handled as normal data.
• If the bar code is wider than the print area, the bar code is not printed, but the data mapping
start position is moved to the left end outside the print area.
[Default] Undefined
[Description of Bar Codes]
In this case, the data mapping start position does not move.
<For print examples, see page 108.>
104
iDP3221 User's Manual
Should the data have an
If any data exists in the
After the bar code
CITIZEN