Clock Functions - Electrolux EB6GL7KCN User Manual

20 www.electrolux.com
Refer to the cleaning function: Tank
Emptying.
CAUTION!
The appliance is hot.
There is a risk of burns.
9. After Steam Cooking steam can
condensate on the bottom of the
cavity. Always dry the bottom of the
cavity when the appliance is cool.
Let the appliance dry fully with the door
open. To speed up the drying you can
close the door and heat up the appliance
with function: True Fan Cooking at
temperature 150°C for approximately 15
minutes.
6.9 Heat-up indicator
When you turn on a heating function, the
bar on the display comes on. The bar
shows that the temperature increases.

7. CLOCK FUNCTIONS

7.1 Clock functions table
Clock func‐
tion
Minute
Minder
Duration
End Time
If you set the time for a clock function,
the time starts to count down after 5
seconds.
Application
To set a countdown
(max. 2 h 30 min).
This function has no
effect on the operation
of the oven. You can
also turn it on when
the oven is turned off.
Use to turn on the
function. Press
to set the minutes
and to start.
To set how long the
oven works (max. 23 h
59 min).
To set the switch-off
time for a heating
function (max. 23 h 59
min).
When temperature is reached the buzzer
sounds 3 times and the bar flashes and
then disappears.
6.10 Fast Heat Up Indicator
This function decreases the heat-up
time.
Do not put food in the oven
when the Fast heat up
function works.
To turn on the function, hold
seconds. The heat-up indicator
alternates.
6.11 Residual heat
When you turn off the oven, the display
shows the residual heat. You can use the
heat to keep the food warm.
If you use the clock
functions: Duration, End
Time, the oven turns off the
heating elements after 90 %
of the set time. The oven
uses the residual heat to
continue the cooking
process until the time ends
(3 - 20 minutes).
7.2 Setting the clock functions
Before you use the
functions: Duration, End
or
Time, you must set a heating
function and temperature
first. The oven turns off
automatically.
You can use the functions:
Duration and End Time at
the same time if you want to
automatically turn on and
turn off the oven on a given
time later.
The functions: Duration and
End Time do not work when
you use the core
temperature sensor.
1. Set a heating function.
for 3