IRSAP The Radiator Company Ottimo Fitting Instructions

Technical Specifications
Material Aluminium
1 flow and return
Connections "
2
Test Pressure 9 Bar
Testing Authority EN442
Max. operating pressure 598/698mm model: 20 Bar, 1480/1880mm model: 6 Bar
Max. working temperature 90ºC
Packaging Wrapped in polythene and boxed
Cleaning Soft damp cloth with nonabrasive cleaning product
PLEASE NOTE: To reduce the possibility of noise caused by rapid heating and cooling of aluminium
radiators; adequate capacity for expansion must be provided within the overall heating system. Systems
using micro bore pipework must have adequate pressure and flow rates for the number and style of
radiators on the system.
Terms & Conditions
All products must be inspected once removed from the packaging and The Radiator Company notified
within 28 days of delivery of any scratches, blemishes or other damage. The Radiator Company will then
replace the radiator.
Imperfect radiators should therefore not be fitted and The Radiator Company will not accept responsibility
for replacement of scratched or damaged radiators once they have been fitted. This includes any
consequential loss or cost of fitting.
If The Radiator Company are not notified within 28 days of the date on the signed delivery note then it
will be deemed that The Radiator Company have fully complied with its obligations and claims will not be
considered.
Failure to comply with any of the above may invalidate any claims.
We recommend that after you check the product on delivery and that it is stored in its packaging to
prevent damage prior to installation. The Radiator Company cannot accept responsibility for items
damaged after delivery.
Guarantees & Liabilities
As we are not the manufacturers of this product we will take all reasonable endeavours to make over to
you the benefit of any warranty or guarantee given by the manufacturer, which is usually five years on most
of our range. (Copies of specific guarantees for any of our products are available on request).
The guarantees in all cases are subject to the products being installed in accordance with British and or
European standards as well as these fitting instructions. The guarantees in all cases are restricted to the
free of charge replacement or repair of the failed product only. Our liability will under no circumstances
extend beyond the repair or replacement of the product supplied by us. Claims for either labour in
replacement or damage to property are not admissible. Any goods that are returned, in the event of a
problem, will belong to The Radiator Company.
If you have any questions please contact us: 01342 302250, www.theradiatorcompany.co.uk
THE
RADIATOR
COMPANY
Fittings Instructions
Please read these instructions and terms and
conditions carefully prior to installation.
Failure to do so may invalidate the warranty.
The Radiator Company
Units 13 - 14 Charlwoods Road
East Grinstead
West Sussex
RH19 2HU
OTTI_IR_1.0
A brand of , Italy's leading manufacturer of design led radiators
Ottimo
10