Table of Contents
Advertisement
4.2 Assembly SOP
Preparation before assemble
1. Clean the room for work
2. Identify the area for material
3. Prepare the implement, equipment, material as bellow:
1) Working table
2) Philips-head screwdriver
3) Glove
4) Cleaning cloth
5) ESD protection
Item
1
2
Picture
Operation
1. Insert I/F board cable and LED
Driver board cable into SPS
board
2. Insert the LVDS cable and I/F
board cable into I/F Board
3. Insert the LED Driver board cable
into Driver Board
4. Assemble PCBA into main
shielding
5. Lock 8 PCB screws
1. Assemble Mylar （Paste Mylar
on Main Shielding like the picture
showed）
- 10 -
Tools
Notes
Philips-
head
screwdriver
Torsion of
PCB screw:
8~9kgf
Advertisement
Table of Contents
