Advertisement
Quick Links
DELL P2419HCB
1. Disassembly Procedures
S1
Turn off power
Place the monitor on a soft cloth or
S2
cushion.
Press and hold the stand-release
button.
Lift the stand up and away from the
monitor.
Unlock 4 Rear Cover screws.
S3
Disassemble Rear Cover and Middle
Frame according to the sequence as
the picture showed
(Screw Torque:9±1Kgf)
1
Tear off the AL foil.
S4
Pull out Control board cable, wire and
USB board cable.
Take down main shielding from middle
frame.
Tear off adhesive tape from LVDS
cable.
Pull out LVDS cable and take off main
shielding from panel
Unlock 9 screws on middle frame
S5
(Screw Torque: 3.5-4.0Kgf)
Unlock 5 screws on bezel
S6
Advertisement
Related Manuals for Dell P2419HCB
Summary of Contents for Dell P2419HCB
- Page 1 DELL P2419HCB 1. Disassembly Procedures Tear off the AL foil. Turn off power Pull out Control board cable, wire and Place the monitor on a soft cloth or USB board cable. cushion. Press and hold the stand-release Take down main shielding from middle button.
- Page 2 DELL P2419HCB (Screw Torque: 1.2-1.25Kgf) Unlock 8 PCB screws Disassemble middle frame and bezel from panel (Screw Torque: 8~9kgf) Take out I/F Board, SPS Board, LED Driver Board from Main Shielding Pull out I/F board cable and LED Driver board cable from SPS Board...
- Page 3 DELL P2419HCB Remove electrolyte capacitors (red mark) from printed circuit boards S11-1 Cut the glue between bulk cap. and PCB with a knife S11-2 Ensure cutting path within the glue, don’t touch bulk cap. or PCB...
- Page 4 DELL P2419HCB S11-3 Take out bulk cap. pin solder with soldering iron and absorber S11-4 Lift the bulk cap. up and away from the PCB...
- Page 5 DELL P2419HCB 2. Product material information The following substances, preparations, or components should be disposed of or recovered separately from other WEEE in compliance with Article 4 of EU Council Directive 75/442/EEC. Capacitors / condensers (containing No used PCB/PCT) Mercury containing components...