3
4
5
1. Insert LVDS cable into interface
on panel and paste acetate tape
2. Locate Main Shielding on middle
frame
1. Insert wire into SPS board
2. Arrange the control board cable
and insert control board cable
into I/F board
3. Fix control board cable on the
panel and main shielding, and
cover a piece of AL foil on the
hole
4. Insert USB board cable into I/F
Board
1. Assemble Rear Cover and
Middle Frame according to the
sequence as the picture showed
2. Lock 4 Rear Cover screws
- 11 -
Philips-
head
screwdriver
Torsion of
RC screw:
9±1Kgf