Table of Contents
Advertisement
3.3
Storage
General information for storage
Danger of serious injuries caused by falling objects
Danger of damage to the gearbox when stacked
Do not stack motors on top of each other.
NOTICE
Failure of the exterior protection
Mechanical damage, chemical damage and thermal damage, such as scratches, acids,
alkalis, sparks, welding beads and heat cause corrosion.
Do not damage the paint finish.
Unless contractually agreed otherwise, the guarantee period for the standard preservative
lasts 6 months from the date of delivery.
In the case of storage in transit over 6 months, special arrangements must be made for
preservation. Please contact Technical Support.
Store the gearbox or geared motor in dry, dust-free rooms that are maintained at a constant
temperature.
The storage location must be vibration- and shock-free.
The free shaft ends, sealing elements and flange surfaces must have a protective coating.
Storage up to 36 months
Store motors in dry, dust-free rooms that are maintained at a constant temperature. Special
packing is then not necessary.
If such premises are not available, pack the gearbox or the geared motor in plastic film or air-
tight sealed film and materials. The films and materials must be able to accept moisture.
Cover them to provide protection against heat, direct sunlight and rain.
The permissible ambient temperature is -25 °C to +50 °C.
The life of the corrosion protection is 36 months from delivery.
BA 2320
Operating Instructions, 02/2015, 70000004023775
WARNING
Incoming goods, transport, and storage
3.3 Storage
23
Advertisement
Table of Contents
