2.5
Surface treatment
2.5.1
General information on surface treatment
All paint finishes are sprayed on.
NOTICE
Failure of the exterior protection
Any damage to the paint finish will destroy the exterior protection and cause corrosion.
Do not damage the paint.
Note
Information about the ability to be repainted does not guarantee the quality of the paint
product purchased from your supplier.
Only the paint manufacturer is liable for quality and compatibility.
2.5.2
Painted version
The corrosion protection system is classified according to the corrosiveness categories in
DIN EN ISO 12944-2.
Table 2- 2
Paint system
Corrosiveness category C1 paint for normal environmental stress
Dip primer
1-component hydro paint
BA 2320
Operating Instructions, 02/2015, 70000004023775
Paint according to corrosiveness categories
Description
Indoor installation
•
Heated buildings with neutral atmospheres
•
Resistance to greases and some resistance
•
to mineral oils, aliphatic solvents
Standard paint
•
Technical description
2.5 Surface treatment
15