Port Status - Cisco SRW2016 User Manual

Chapter 4
File Management
The File Management screen allows you to upload or
download files, such as the startup configuration, boot, or
image file, using a TFTP server.
File Management
Select Edit to change the settings. When your changes are
complete, press the Esc key to return to the Action menu,
and select Execute to upload or download the designated
file.
If you are downloading a new boot & image, please follow
these steps:
1. Download the new boot code. DO NOT RESET THE
DEVICE!
2. Download the new software image.
3. Reset the device now.
NOTE: When downloading a configuration file,
be sure that it is a valid configuration file. If
you have edited the file, ensure that only valid
entries have been configured.
Restore System Default Settings
Restore System Default Settings
To restore the Switch back to the factory default settings,
select Restore System Default Settings and press the
Enter key. You will be asked if you want to continue. Press
the y key to restore the Switch's default settings, or press
the n key to cancel.
WebView Switches
Configuration Using the Console Interface
Reboot System
Reboot System
Select Reboot System and press the Enter key if you
want to restart the Switch. You will be asked if you want to
continue. Press the y key to reboot the Switch, or press the
n key to cancel. After the Switch has rebooted, the Switch
Main Menu screen will appear.
Back to main menu
Select Back to main menu and press the Enter key if you
want to return to the Switch Main Menu screen.

Port Status

On the Switch Main Menu screen, select Port Status
and press the Enter key if you want to view the status
information for the Switch's ports.
The Port Status screen displays the port numbers, their
status, Link status, speed and duplex mode, and status of
flow control, which is the flow of packet transmissions.
If you want to change any settings for a port, you must use
the Port Configuration screen.
Port Status
18