Chapter 5
SNMP > Global Parameters
The Global Parameters screen contains parameters for
defining SNMP notification parameters.
SNMP > Global Parameters
Local Engine ID
Indicates the local device engine ID. The
field value is a hexadecimal string. Each byte in hexadecimal
character strings consists of two hexadecimal digits. Each
byte can be separated by a period or a colon. The Engine
ID must be defined before SNMPv3 is enabled. For stand-
alone devices, select a default Engine ID that is comprised
of Enterprise number and the default MAC address. For a
stackable system configure the Engine ID, and verify that
the Engine ID is unique for the administrative domain.
This prevents two devices in a network from having the
same Engine ID.
Use Default
Uses the device generated Engine ID. The
default Engine ID is based on the device MAC address and
is defined per standard as:
•
First 4 octets—first bit = 1, the rest is IANA Enterprise
number.
Fifth octet—Set to
3 to indicate the MAC address that
•
follows.
•
Last 6 octets—MAC address of the device.
SNMP Notifications
Indicates if the device can send
SNMP notifications.
Authentication
Notifications
Authentication failure notification is enabled on the
device.
WebView Switches
Indicates
if
SNMP
Advanced Configuration
SNMP > Views
SNMP Views provide access or block access to device
features or feature aspects. For example, a view can be
defined that states that SNMP Group A has Read Only
(R/O) access to Multicast groups, while SNMP Group B
has Read-Write (R/W) access to Multicast groups. Feature
access is granted via the MIB name, or MIB Object ID.
SNMP > Views
View Name
Displays the user-defined views. The options
are as follows:
Default
•
Displays the default SNMP view for read and
read/write views.
DefaultSuper
Displays the default SNMP view for
•
administrator views.
Subtree ID Tree
Indicates the device feature OID included
or excluded in the selected SNMP view. The options to
select the Subtree are as follows:
Select from List
Select the Subtree from the list
•
provided.
•
Insert
Enables a Subtree not included in the Select
from List field to be entered.
View Type
Indicates if the defined OID branch will be
included or excluded in the selected SNMP view.
Use the Add to List button to add the Views configuration
to the Views Table at the bottom of the screen.
51