Midea MUE-18HRFNX-QRD0 Technical Manual page 81

120mm
• Wiring diagram
Refer to the following diagram to wire the wall-mounted remote control to the indoor unit.
• Installation Diagram
Connect the wire from the display panel of the indoor unit to a connecting cable. Then connect the other side of the
connecting cable to the remote control.
Note: Be sure to reserve a length of the connecting wire for periodic maintenance.
120mm
(4.7")
(4.7")
Wire Joint, 5p
5-Core Shield Cable
The connective wires group(6m)
5-core wire
21mm
13.1mm
(0.8")
(0.5")
50mm
(1.9")
RUN
Indoor Unit Switch Board
Indoor Unit
19.5mm
(0.7")
85.5mm
(3.3")
Infrared Pipe
+5V
GND
Display board
 Page 81 