Midea MUE-18HRFNX-QRD0 Technical Manual page 78

NOTE: No heating mode for cool only type unit.
4. VERT SWING: Used to stop or start horizontal
louver movement. The louver will swing up and down
automatically if push this button.
5. HORIZ SWING: Used to stop or start vertical louver
movement.
AIR DIRECTION: Used to set the desired up/down air flow
direction. The louver changes 6 degree in angle for each
press.
6. RESET (inner located): Once the recessed RESET button
is pressed, all of the current settings will be cancelled and
the controller will return to the initial settings..
7. ON/OFF: For turning on or turning off the air
conditioner.
8. FAN SPEED: Fan speed will be selected in following
sequence once pressing this button:
9. TIME ON: For time ON setting. Press this button to
activate the Auto-on time setting. Each press will increase
the time setting in 30 minutes increments, up to 10 hours,
then at 1 hour increments up to 24 hours. To cancel the
Auto-on time setting, just press the button until the time
setting is 0.0.
10. ECO: Select this function during the sleeping time. It
can maintain the most comfortable temperature and save
energy. This function is available on COOL, HEAT or AUTO
mode only .
NOTE: While the unit is running under Energy-saving
mode, it would be cancelled if press MODE, FAN SPEED or
ON/OFF button.
11. TIME OFF: For time OFF setting. Press this button to
activate the Auto-off time setting. Each press will increase
the time setting in 30 minutes increments, up to 10 hours,
then at 1 hour increments up to 24 hours. To cancel the
Auto-off time setting, just press the button until the time
setting is 0.0.
12. C/H (inner located): Press this recessed button to shift
the mode between Cooling only and Cooling & Heating
according to the feature of the machine. The factory
default setting mode is Cooling & Heating. For example,
the unit you purchased is Cooling only models, please
press this recessed button with a needle of 1mm to shift
the operation mode.
 Page 78 
2.1.2 RG57B2/BGE(Optional)
Remote Controller Specifications
Model
Rated Voltage
Lowest Voltage of CPU
Emitting Signal
Reaching Distance
Environment Temperature
Range
Buttons and Functions
RG57B2/BGE
3.0V (Dry batteries R03/
LR03×2)
2.0V
8m (when using 3.0
voltage, it can get 11m)
-5℃~60℃(23℉~140℉)